About the origins of residual stresses in <Emphasis Type="Italic">in situ</Emphasis> consolidated thermoplastic composite rings

In a context of cost reduction, in situ filament winding of thermoplastic matrix composites becomes an appealing process. As residual stresses could considerably affect the produced part, models were proposed to predict process-induced residual stresses. After developing a validated thermal model of the process, mainly three different aspects are here addressed: the continuous bonding occurring during the process, the effect of the processed layer on the structure, and the effect of the curvature of the mandrel. While stresses coming from the continuous bonding appeared to be negligible, consequent levels of stresses can be achieved due to an iterative compression of the structure by the tow (supposed to be under tension). The mandrel properties and the tow tension profile followed during winding are essential parameters that might induce several different stress states. A comparison between measured and computed end-to-end openings of split rings illustrates the accuracy of the proposed models.     

Prospects of Supercritical Fluids in Realizing Graphene‐Based Functional Materials

Supercritical‐fluids science and technology predate all the approaches that are currently established for graphene production by several decades in advanced materials design. However, it has only recently been proposed as a plausible approach for graphene processing. Since then, supercritical fluids have emerged into contention as an alternative to existing technologies because of their scalability and versatility in processing graphene materials, which include composites, aerogels, and foams. Here, an overview is presented of such materials prepared through supercritical fluids from an advanced materials science standpoint, with a discussion on their fundamental properties and technological applications. The benefits of supercritical‐fluid processing over conventional liquid‐phase processing are presented. The benefits include not only better performances for advanced applications but also environmental issues associated with the synthesis process. Nevertheless, the limitations of supercritical‐fluid processing are also stressed, along with challenges that are still faced toward the achievement of the great expectations from graphene materials.     

Haar invariant signatures and spatial recognition using omnidirectional visual information only

This paper describes a method for spatial representation, place recognition and qualitative self-localization in dynamic indoor environments, based on omnidirectional images. This is a difficult problem because of the perceptual ambiguity of the acquired images, and their weak robustness to noise, geometrical and photometric variations of real world scenes. The spatial representation is built up invariant signatures using Invariance Theory where we suggest to adapt Haar invariant integrals to the particular geometry and image transformations of catadioptric omnidirectional sensors. It follows that combining simple image features in a process of integration over visual transformations and robot motion, can build discriminant percepts about robot spatial locations. We further analyze the invariance properties of the signatures and the apparent relation between their similarity measures and metric distances. The invariance properties of the signatures can be adapted to infer a hierarchical process, from global room recognition to local and coarse robot localization.     

An integrative approach to requirements analysis: How task models support requirements reuse in a user-centric design framework

Many software systems fail to address their intended purpose because of a lack of user involvement and requirements deficiencies. This paper discusses the elaboration of a requirements-analysis process that integrates a critical-parameter-based approach to task modeling within a user-centric design framework. On one hand, adapting task models to capture requirements bridges the gap between scenarios and critical parameters which benefits design from the standpoint of user involvement and accurate requirements. On the other hand, using task models as a reusable component leverages requirements reuse which benefits design by increasing quality while simultaneously reducing development costs and time-to-market. First, we present the establishment of both a user-centric and reuse-centric requirements process along with its implementation within an integrated design tool suite. Secondly, we report the design, procedures, and findings of two user studies aimed at assessing the feasibility for novice designers to conduct the process as well as evaluating the resulting benefits upon requirements-analysis deliverables, requirements quality, and requirements reuse.     

A co-classification approach to learning from multilingual corpora

We address the problem of learning text categorization from a corpus of multilingual documents. We propose a multiview learning, co-regularization approach, in which we consider each language as a separate source, and minimize a joint loss that combines monolingual classification losses in each language while ensuring consistency of the categorization across languages. We derive training algorithms for logistic regression and boosting, and show that the resulting categorizers outperform models trained independently on each language, and even, most of the times, models trained on the joint bilingual data. Experiments are carried out on a multilingual extension of the RCV2 corpus, which is available for benchmarking.     

Single amino acid substitutions can further increase the stability of a thermophilic L-lactate dehydrogenase

Lactate dehydrogenases are of considerable interest as stereospecificcatalysts in the chemical preparation of enantiomerically pure-hydroxyacid synthons. For such applications in synthetic organicchemistry it would be desirable to have enzymes which tolerateelevated temperatures for prolonged reaction times, to increaseproductivity and to extend then applicability to poor substrates.Here, two examples are reported of significant thermostabilizations,induced by sitedirected mutagenesis, of an already thermostableprotein, the L-lactate dehydrogenase (EC 1.1.1.27 [EC] , 35 kDa permonomer subunit) from Bacillus stearothermophilus. Thermal inactivationof this enzyme is accompanied by irreversible unfolding of thenative protein structure. The replacement of Argl71 by Tyr stabilizesthe enzyme against thermal inactivation and unfolding. Thisstabilizing effect appears to be based on improved interactionsbetween the subunits in the core of the active dimeric or tetramericforms of the enzyme. The thermal stability of L-lactate dehydrogenasevariants with an active site Arg residue, either in the 171(wild-type) or in the 102 position, is further increased bysulfate ions. The two stabilizing effects are additive, as foundfor the Argl71Tyr/ Gln1O2Arg double mutant, for which the stabilityof the protein in 100 mM sulfate solution reaches that of L-lactatedehydrogenases from extreme thermophiles. All mutant proteinsretain significant catalytic activity, both in the presenceand absence of stnhilfoing salts, and are viable catalysts inpreparative scale reactions.     

Multiscale physical characterization of an outdoor-exposed polymeric coating system

Surface topography and gloss are two related properties affecting the appearance of a polymeric coating system. Upon exposure to ultraviolet (UV) radiation, the surface topography of a coating becomes more pronounced and, correspondingly, its gloss generally decreases. However, the surface factors affecting gloss and appearance are difficult to ascertain. In this article, atomic force microscopy (AFM) and laser scanning confocal microscopy (LSCM) measurements have been performed on an amine-cured epoxy coating system exposed to outdoor environments in Gaithersburg, Maryland. The formation of the protuberances is observed at the early degradation stages, followed by the appearance of circular pits as exposure continues. At long exposure times, the circular features enlarge and deepen, resulting in a rough surface topography and crack formation. Fourier Transform Infrared Spectroscopy (FTIR) study indicates that the oxidation and chain scission reactions are likely the origins of the surface morphological changes. The relationship between changes in surface roughness and gloss has been analyzed. The root mean square (RMS) roughness of the coating is related to nanoscale and microscale morphological changes in the surface of the coating as well as to the gloss retention. A near-linear dependence of RMS roughness with the measurement length scale (L) is found on a double logarithmic scale, i.e., RMS ∼ L ^f. The scaling factor, f, decreases with exposure time. The relationship between surface topography, on nano- to microscales, and the macroscale optical properties such as gloss retention is discussed. Moreover, a recent development in using an angle-resolved light scattering technique for the measurement of the specular and off-specular reflectance of the UV-exposed specimens is also demonstrated, and the optical scattering data are compared to the gloss and the roughness results.

In vitro synergistic effect of farnesol and human gingival cells against Candida albicans

Farnesol prevents the germination of yeast cells into mycelia, a fact that may be useful in eliminating C. albicans pathogenicity. Given the clinical potential of farnesol, its impact on C. albicans and host cells merited further investigation. We thus studied the effect of farnesol on C. albicans growth and filamentation and on gingival epithelial cells and fibroblasts and the synergistic effect of both gingival cells and farnesol on C. albicans filamentation. Repeated additions of farnesol reduced the growth of C. albicans. Farnesol was also effective at reducing C. albicans germ tube formation. While farnesol inhibited germ tube formation under the conditions tested, it was most effective at inhibiting C. albicans filamentation when added to the culture medium at the same time as the serum. Farnesol also had an effect on gingival cells. In a serum-free medium, farnesol reduced fibroblast adhesion and proliferation, promoted epithelial cell differentiation and reduced proliferation up to 48 h post-treatment. These effects were not seen in the presence of serum. When C. albicans, farnesol and gingival cells were present in the same culture, significantly greater inhibition of the yeast-to-hyphal transition was observed than germ tube inhibition in cultures containing only C. albicans and farnesol, suggesting a synergistic effect between the gingival cells and farnesol in inhibiting the transition. Overall, the data suggest that farnesol is effective against C. albicans and may have an effect on host cells at certain concentrations.     

A block diagram model of the thickness mode piezoelectric transducer containing dual oppositely polarized piezoelectric zones

A unidimensional, linear systems, block diagram model of a two-layer thickness mode piezoelectric transducer is presented. The layers are subject to opposing piezoelectric polarization and the device is assumed to be loaded by semi-infinite isotropic media at the two principal faces. Block diagram representations of the transducer acting as both a generator and a receiver of ultrasound are developed in conjunction with the equivalent model of the electrical admittance. When expressed in this manner, the underlying cause and effect relationships are identified, with the important contribution of the piezoelectric boundary highlighted. Comparisons with the conventional single-layer transducer are made throughout and the major physical differences in terms of transduction performance are discussed. The new model is compared with finite element analysis and good agreement is also demonstrated with experimental data. A key aspect of the methodology is the provision of a more intuitive understanding of such device behavior. Accordingly, emphasis has been placed on the physical relationships and this is considered a major contribution of the work.     

Cationic liposome-DNA complexes: from liquid crystal science to gene delivery applications

At present, there is an unprecedented level of interest in the properties and structures of complexes consisting of DNA mixed with oppositely charged cationic liposomes (CLs). The interest arises because the complexes mimic natural viruses as chemical carriers of DNA into cells in worldwide human gene therapy clinical trials. However, since our understanding of the mechanisms of action of CL-DNA complexes interacting with cells remains poor, significant additional insights and discoveries will be required before the development of efficient chemical carriers suitable for long-term therapeutic applications. Recent studies describe synchrotron X-ray diffraction, which has revealed the liquid crystalline nature of CL-DNA complexes, and three-dimensional laser-scanning confocal microscopy, which reveals CL-DNA pathways and interactions with cells. The importance of the liquid crystalline structures in biological function is revealed in the application of these modern techniques in combination with functional transfection efficiency measurements, which shows that the mechanism of gene release from complexes in the cell cytoplasm is dependent on their precise liquid crystalline nature and the physical and chemical parameters (for example, the membrane charge density) of the complexes. In [section sign] 5, we describe some recent new results aimed at developing bionanotube vectors for gene delivery.